[NTLUG:Discuss] LinkSys WPC11 wireless card install help

[technogeezer@attbi.com]

Can you elaborate on the insmod steps? Like what does that mean and where would i find the prism2_cs/p80211 files?
  ----- Original Message ----- 
  From: Paul Ingendorf 
  To: NTLUG Discussion List 
  Sent: Sunday, February 16, 2003 6:41 PM
  Subject: RE: [NTLUG:Discuss] LinkSys WPC11 wireless card install help


  I had the same issues with the PCI version of the card I ended up being forced to download and instlal on my own making the appropriate choices.  Don't forget when you are done to insmod p80211 and insmod prism2_cs or insmod prism2_plx as needed.
    -----Original Message-----
    From: discuss-bounces at ntlug.org [mailto:discuss-bounces at ntlug.org]On Behalf Of Patrick Parks
    Sent: Sunday, February 16, 2003 3:11 PM
    To: 'NTLUG Discussion List'
    Subject: RE: [NTLUG:Discuss] LinkSys WPC11 wireless card install help


    Thanks, if I get it working, maybe I can help you out, lets see what happens!

     

    -----Original Message-----
    From: discuss-bounces at ntlug.org [mailto:discuss-bounces at ntlug.org] On Behalf Of technogeezer at attbi.com
    Sent: Sunday, February 16, 2003 3:06 PM
    To: NTLUG Discussion List
    Subject: Re: [NTLUG:Discuss] LinkSys WPC11 wireless card install help

     

    I got them from here: http://prism2.unixguru.raleigh.nc.us/rh80/index.html

     

    I believe you need a Base package, a Module package, and an Interface package.

     

    Hope you have better luck than I am having

      ----- Original Message ----- 

      From: Patrick Parks 

      To: 'NTLUG Discussion List' 

      Sent: Sunday, February 16, 2003 2:54 PM

      Subject: RE: [NTLUG:Discuss] LinkSys WPC11 wireless card install help

       

      Sorry I cant help you with your problem, but I have a question for you. Where did you get the RPM's for this card? I just got the WPC54G and am looking for info on getting it installed in my laptop, Please let me know if you have seen anything on this card, thanks.

       

      -----Original Message-----
      From: discuss-bounces at ntlug.org [mailto:discuss-bounces at ntlug.org] On Behalf Of technogeezer at attbi.com
      Sent: Sunday, February 16, 2003 2:11 PM
      To: discuss at ntlug.org
      Subject: [NTLUG:Discuss] LinkSys WPC11 wireless card install help

       

      Hi guys.

       

      I need some help installing my Linksys WPC11 wireless card onto my HP zt1180 laptop.

       

      I have installed, via RPM, the following packages:

       

      kernel-wlan-ng  ---- version 0.1.15-6

      kernel-wlan-ng-modules-rh80.24 ---- version 0.1.15-6

      kernel-wlan-ng-pcmcia ---- version 0.1.15-6

       

      Nothing happens. There isn't even a light on the PCMCIA adapter! Keep in mind that this adapter has worked flawlessly under Win2k and WinXP so I am pretty sure that the adapter is not malfunctioning.

       

      I've run "/sbin/lsmod" but there is no pcmcia adapter nor pcmcia service listed.

       

      Whenever I try to "/sbin/cardctrl/ident" the following message is returned: "no pcmcia driver in /proc/devices"

       

      I think the problem is that my PCMCIA card/slot is not being recognized. I think the drivers/software is set up correctly. I have read lots of install info on the 'NET and they always talk of removing and re-inserting the PCMCIA card and hearing beeps. I never hear any beeps.

       

      Can anyone help me?

       

      Thanks,

       

      Frank


--------------------------------------------------------------------------

      _______________________________________________
      https://ntlug.org/mailman/listinfo/discuss



------------------------------------------------------------------------------


  _______________________________________________
  https://ntlug.org/mailman/listinfo/discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://ntlug.org/pipermail/discuss/attachments/20030216/bd9f4021/attachment.html