[NTLUG:Discuss] Any idea how to get aSprintEVDOwirelessbroadband card to

[. Daniel]

Okay, try doing that after the device is inserted.  Also, what is the 
behavior of module loading?  Do additional modules get loaded when the 
device is inserted?

>I am using a Sharp PC-M4000 laptop.
>
>Yes, I issued this command before I inserted the card:
>
>    modprobe usbserial vendor=0x1410 product=0x1110
>
>David
>
> >From: ". Daniel" <xdesign at hotmail.com>
> >Reply-To: NTLUG Discussion List <Discuss at ntlug.org>
> >To: Discuss at ntlug.org
> >Subject: Re: [NTLUG:Discuss] Any idea how to get a
> >SprintEVDOwirelessbroadband card to
> >Date: Wed, 19 Jul 2006 05:12:58 -0500
> >
> >What kind of laptop are you using?  Clearly your laptop sees the 
hardware
> >as a different type of device than my Inspiron 8600 does.  That could 
prove
> >crucial in making it work.  Also, did you get the modprobe thing to load
> >any modules specific to the device manually?  The web site I indicated
> >before shows how to do that.
> >
> > >
> > >When I insert the card (after I did the modprobe), all I get is this
> > >message:
> > >
> > >    pccard: CardBus card inserted into slot 0
> > >
> > >Any ideas?
> > >
> > >Thanks,
> > >
> > >David
> > >
> > >
> > > >From: Wayne Walker <wwalker at bybent.com>
> > > >Reply-To: Wayne Walker <wwalker at bybent.com>,NTLUG Discussion List
> > > ><Discuss at ntlug.org>
> > > >To: NTLUG Discussion List <Discuss at ntlug.org>
> > > >Subject: Re: [NTLUG:Discuss] Any idea how to get a Sprint EVDO
> > > >wirelessbroadband card to work under SUSE 10?
> > > >Date: Tue, 18 Jul 2006 20:11:25 -0500
> > > >
> > > >Run "dmesg | grep -i acm"  see if it's showing up as an ACM device.
> >for
> > > >me, my evdo (albeit T-Mobile) shows up as /dev/ttyACM0...
> > > >
> > > >On Mon, Jul 17, 2006 at 07:45:43PM -0500, David Trusty wrote:
> > > > > Hi,
> > > > >
> > > > > I have a Sprint broadband PCMCIA card (Merlin S620), and I am
> > > > > running SUSE 10.1.   I have seen some web notes about using 
modprobe
> > > > > and ppp to get it to work, but these procedures don't work on 
SUSE
> >10.1.
> > > > >
> > > > > Any ideas?
> > > > >
> > > > > Thanks!!
> > > > >
> > > > > David
> > > > >
> > > > >
> > > > >
> > > > > _______________________________________________
> > > > > http://ntlug.pmichaud.com/mailman/listinfo/discuss
> > > >
> > > >--
> > > >
> > > >Wayne Walker
> > > >
> > > >www.unwiredbuyer.com - when you just can't be by the computer
> > > >
> > > >wwalker at bybent.com                    Do you use Linux?!
> > > >http://www.bybent.com                 Get Counted!
> >http://counter.li.org/
> > > >Perl - http://www.perl.org/           Perl User Groups -
> >http://www.pm.org/
> > > >Jabber:  wwalker at jabber.gnumber.com   AIM:     lwwalkerbybent
> > > >IRC:     wwalker on freenode.net
> > > >
> > > >_______________________________________________
> > > >http://ntlug.pmichaud.com/mailman/listinfo/discuss
> > >
> > >
> > >
> > >_______________________________________________
> > >http://ntlug.pmichaud.com/mailman/listinfo/discuss
> >
> >
> >
> >_______________________________________________
> >http://ntlug.pmichaud.com/mailman/listinfo/discuss
>
>
>
>_______________________________________________
>http://ntlug.pmichaud.com/mailman/listinfo/discuss