[NTLUG:Discuss] CUPS/SAMBA ISSUE

Sun May 4 09:29:00 CDT 2008

a little CUPS/SAMBA issue that i just can seem to see what i've done wrong. 
I'm sure its something simple i've over looked hopefully one of you will spot 
it and tell me where my mistake is. below are my config files, yes it is 
painfully obvious that i've just edited the default configs to my needs 
(short of what i've obviously missed)

when printing from a windows vista machine to my kubuntu 8.04 box the document 
makes it all the way to the cups "jobs" screen then just seems to stop there, 
and never actually print out of the printer. But any job printed locally on 
the kubuntu box prints out the printer every time.

this is with a HL-2140 if that is relevant to anyone.

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which 
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic 
# errors. 
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = WORKGROUP

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
   bind interfaces only = true

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = no

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

;   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan 
<<kahan at informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n 
*Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how nsuccessful authentication attempts are mapped 
# to anonymous connections
map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script 
= /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
   printing = bsd
   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
   printing = cups
   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) 
and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
[homes]
   comment = Home Directories
   browseable = yes

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
   read only = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = yes
   path = /var/spool/samba
   printable = yes
   guest ok = yes
   read only = yes
   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = yes
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

################################################
################################################

HERE'S THE CUPS SERVER FILE

Classification none
DefaultCharset UTF-8
DefaultLanguage en
Printcap /etc/printcap
PrintcapFormat BSD
RemoteRoot remroot
SystemGroup lpadmin
ServerCertificate /etc/cups/ssl/server.crt
ServerKey /etc/cups/ssl/server.key
<Location />
  Encryption IfRequested
  Satisfy All
  Allow all
  Allow shared printing and remote administration...
  Order allow,deny
  Allow all
</Location>
<Location /admin>
  Encryption IfRequested
  Satisfy All
  Allow all
  Allow remote administration...
  Order allow,deny
  Allow all
</Location>
<Location /admin/conf>
  Require user @SYSTEM
  Encryption IfRequested
  Satisfy All
  Allow all
  # Allow remote access to the configuration files...
  Order allow,deny
  Allow all
</Location>
HostnameLookups Off
KeepAlive On
KeepAliveTimeout 60
MaxClients 100
MaxRequestSize 0m
Timeout 300
#Uncommented this line
Allow remote access
Port 631
Listen /var/run/cups/cups.sock
AccessLog /var/log/cups/access_log
ErrorLog /var/log/cups/error_log
PageLog /var/log/cups/page_log
MaxLogSize 1m
#Uncommented this line
Show troubleshooting information in error_log.
LogLevel debug
PreserveJobHistory On
PreserveJobFiles Off
AutoPurgeJobs No
MaxJobs 0
MaxJobsPerPrinter 0
MaxJobsPerUser 0
User lp
Group lpadmin
RIPCache 8m
FilterLimit 0
DataDir /usr/share/cups
DocumentRoot /usr/share/cups/doc-root
RequestRoot /var/spool/cups
ServerBin /usr/lib/cups
ServerRoot /etc/cups
TempDir /var/spool/cups/tmp
#Uncommented this line
Enable printer sharing and shared printers.
Browsing On
BrowseOrder allow,deny
BrowseAllow all
BrowseAddress @LOCAL
BrowseProtocols CUPS
BrowsePort 631
BrowseInterval 30
BrowseTimeout 300
ImplicitClasses On
ImplicitAnyClasses Off
HideImplicitMembers Yes
BrowseShortNames Yes
defaultauthtype Basic
<policy default>
  <limit Send-Document Send-URI Hold-Job Release-Job Restart-Job Purge-Jobs 
Set-Job-Attributes Create-Job-Subscription Renew-Subscription 
Cancel-Subscription Get-Notifications Reprocess-Job Cancel-Current-Job 
Suspend-Current-Job Resume-Job CUPS-Move-Job>
    require user @OWNER @SYSTEM
    order deny,allow
  </limit>
  <limit CUPS-Add-Modify-Printer CUPS-Delete-Printer CUPS-Add-Modify-Class 
CUPS-Delete-Class CUPS-Set-Default>
    authtype Default
    require user @SYSTEM
    order deny,allow
  </limit>
  <limit Pause-Printer Resume-Printer Enable-Printer Disable-Printer 
Pause-Printer-After-Current-Job Hold-New-Jobs Release-Held-New-Jobs 
Deactivate-Printer Activate-Printer Restart-Printer Shutdown-Printer 
Startup-Printer Promote-Job Schedule-Job-After CUPS-Accept-Jobs 
CUPS-Reject-Jobs>
    authtype Default
    require user @SYSTEM
    order deny,allow
  </limit>
  <limit CUPS-Authenticate-Job>
    require user @OWNER @SYSTEM
    order deny,allow
  </Limit>
  <limit All>
    order deny,allow
  </limit>
</Policy>

-- 
Christopher D. Thompson
kf4drr at windstream.net