[NTLUG:Discuss] Umax scanner

[clyde swann]

To make it a little clearer I also should have mentioned that scsi devices, 
scanner in this case, are identified as scsi 1, scsi 2, fast scsi, etc.  
Determine which catagory your scanner fails in then verify the card you are 
considering supports that protocol and has the connector type you need.  Any 
scsi card that supports your scanner's specs should work regardless of brand 
of scanner or card.  Just remember what I said about adaptec.


>From: bobby at wrennest.com
>Reply-To: discuss at ntlug.org
>To: discuss at ntlug.org
>Subject: Re: [NTLUG:Discuss] Umax scanner
>Date: Tue, 03 Oct 2000 20:24:59 -0500
>
>clyde swann wrote:
> >
> > If your scanner's scsi connection is 50 pin high density, take a look at 
>the
> > adaptec 2930 ultra scsi card, a $100 bucks at Frys.  If you want to go 
>usb
>
>The scsi port is a DB25 connector. I am using RH6.2. What SCSI
>controller works in this combination. Is there a matrix which somewhere
>which shows what cards go with which scanners and distribs?
>
>Thanks
>Bobby
>--
>This tagline is identical to the one you are reading.
>_______________________________________________
>http://ntlug.org/mailman/listinfo/discuss

_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.

Share information about yourself, create your own public profile at 
http://profiles.msn.com.