[NTLUG:Discuss] USB Multi-format reader with Linux

[Jack Snodgrass]

I enabled the SCSI Luns on my 2.4.24 kernel 
and now I see the 6 devices on my /proc/scsi/scsi output. 
My CF is /dev/sda1 and my Smart Media card is /dev/sdc1. 

Thanks for the pointer. 

jack 


On Mon, 2004-05-24 at 11:32, Kyle Davenport wrote:
> # cat /proc/scsi/scsi
> Host: scsi2 Channel: 00 Id: 00 Lun: 00
>   Vendor: USB2.0   Model: CardReader CF RW Rev: 0.0>
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 00 Lun: 01
>   Vendor: USB2.0   Model: CardReader SD RW Rev: 0.0>
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 00 Lun: 02
>   Vendor: USB2.0   Model: CardReader SM RW Rev: 0.0>
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> Host: scsi2 Channel: 00 Id: 00 Lun: 03
>   Vendor: USB2.0   Model: CardReader MS RW Rev: 0.0>
>   Type:   Direct-Access                    ANSI SCSI revision: 02
> 
> If the device isn't detected correctly, you wouldn't see different luns.
> I'll try again with 2.6.6 and post results.
> 
> Check out the database at http://www.qbik.ch/usb/devices
> 
> Kyle
> 
> ______________________________________________________________________
> _______________________________________________
> https://ntlug.org/mailman/listinfo/discuss